Alabama Sliding Door Repair Statewide door & window repair Click to Call (205) 619-2895
Home Alabama Flomaton Door Hinge Repair

Flomaton, Alabama · Escambia County

Door Hinge Repair and Replacement in Flomaton, AL

A sagging door is almost always a hinge problem, and almost always the top hinge. It carries the most load, and when its screws lose their grip the whole door tilts and starts dragging on the latch side.

  • Repair first, replace last
  • Homes & businesses
  • Escambia County covered
  • Straight answers on the phone

Click to Call (205) 619-2895

Door Hinge Repair diagram
Door Hinge Repair — Flomaton, Alabama

We cover Flomaton and the rest of Escambia County, from Main Street across to the US-29 corridor, and we are out this way often enough that Atmore and Brewton are on the same run.

Flomaton has enough older housing stock that repair almost always beats replacement here, and enough new construction that we spend a lot of time on hardware that failed early.

Most doors we see are repairable.Call and find out before you price a replacement.

Click to Call (205) 619-2895

When to call about door hinge repair

These are the door hinge repair faults we are called out to most often in Flomaton. If you recognise one, the underlying cause is usually the second half of the line.

  • The door will not latch anymoreThe whole door has moved position because of hinge wear.
  • The door drags on the floor or on the latch sideThe top hinge has pulled loose and the door has tilted.
  • Rust has locked the pin in placeUntreated steel hinges on an exposed opening, which will keep seizing until they are replaced.
  • Paint cracking around hinge leavesMovement. The hinge is shifting every time the door swings.
  • Rust streaks below the hingesCorroding hinges, common on exterior doors that get weather.
  • The door binds only in the last inch of closingA hinge mortised too deep, pushing the door toward the strike as it comes home.

Need it looked at soon?Call and we will tell you honestly when we can get there.

Click to Call (205) 619-2895

What we see on door hinge repair around Escambia County

Between roughly 65 inches of rain a year, near-constant humidity and a June-to-November hurricane season, coastal doors work harder than doors anywhere else in Alabama.

A gust catching an open door and slamming it against its stop puts an enormous shock load through the top hinge, and that single event is often what starts a sag that develops over the following months.

Damp jamb material loses its grip on screw threads, and a hinge screw that was tight in a dry jamb starts to spin once the wood around it has been at high moisture content for a couple of seasons.

We factor that in on every door hinge repair job around the Flomaton depot and the rest of Flomaton.

Local factors we account for in Flomaton: storm wind and sustained humidity — typical of the Alabama Gulf Coast.

Most doors we see are repairable.Call and find out before you price a replacement.

Click to Call (205) 619-2895

Our door hinge repair services in Flomaton

  • Squeak eliminationCleaning, servicing and correctly lubricating hinges so they stay quiet.
  • Mortise repairRepairing damaged or over-deep hinge mortises in door and jamb.
  • Hinge replacementNew hinges sized and rated to the door weight, in matching finishes.
  • Screw hole repairRebuilding stripped holes so fasteners bite properly instead of spinning.
  • Continuous hinge installationFull-length geared hinges for heavy commercial doors that keep tearing out standard hinges.
  • Security hinge installationNon-removable pin hinges and hinge-side reinforcement on exterior doors.
  • Long-screw anchoringRunning fasteners through the jamb into the structural framing so the hinge holds the real load.

Most doors we see are repairable.Call and find out before you price a replacement.

Click to Call (205) 619-2895

How a Flomaton door hinge repair visit works

  1. Find which hinge actually failedWe check the reveal at the top and bottom of the door, which tells us where the movement started.
  2. Check what the screws are holding ontoShort screws into casing rather than framing are the most common cause of sag we see, and no hinge fixes that.
  3. Rebuild the anchorageWhere the screws no longer bite, we fill and re-drill so the fixings reach solid material, then fit long screws into framing.
  4. Match the hinge to the doorWeight, size, throw and finish. Heavy doors and doors with closers need bearing hinges.
  5. Re-hang and check the revealEven gap top to bottom on the latch side, and a door that stays where you leave it.
  6. Silence it properlyOnce the geometry is right, the pins and knuckles are lubricated so the squeak does not simply come back. On the coast we also check every fastener on the opening, because salt finds plated screws long before it touches the door itself.

Broken, stuck, or will not lock?Talk to someone who works on these every day.

Click to Call (205) 619-2895

What affects the cost of door hinge repair in Flomaton

What a door hinge repair job costs comes down to a handful of things, and we would rather be straight about them up front:

  • how many hinges need replacement versus repair
  • standard hinges versus ball bearing or continuous hinges
  • whether the mortises or screw holes need rebuilding first
  • whether the door also needs re-hanging or the strike relocated
  • the weight and size of the door

Call and describe what the door is doing. In most cases we can tell you over the phone which of those applies to you before anyone drives out to Flomaton.

Tell us what the door is doing and we will tell you what it needs.No guesswork over the phone, no pressure.

Click to Call (205) 619-2895

Areas we cover for door hinge repair in Flomaton

Flomaton coverage runs across Main Street and the US-29 corridor, and out to the areas around the Flomaton depot and the Florida state line.

Service area: Flomaton, Escambia County, Alabama — and the surrounding communities.

We also cover the nearby Escambia County and the Alabama Gulf Coast communities listed further down this page.

Need it looked at soon?Call and we will tell you honestly when we can get there.

Click to Call (205) 619-2895

Door hinge repair in Flomaton: questions we get asked

Are the hinges on my sliding door serviceable?

Sliding doors do not use hinges, but French and swinging patio doors do, and they are heavy. Those hinges take a lot of load and are worth checking if the door has started dragging.

How long does hinge work take?

Straightforward hinge replacement is usually under an hour. If the mortises are damaged or the door needs re-hanging and the strike relocated, allow longer.

Do you do commercial hinge work?

Yes, including continuous geared hinges for heavy traffic doors in Flomaton businesses that keep tearing standard hinges out of the frame.

Can hinges be repaired or do they have to be replaced?

Pins, tips and lubrication problems are repairable. Once the knuckles have worn oval and the hinge has play in it, it is done and needs replacing, and putting a new pin in a worn hinge does not help.

What makes hinges squeal?

Dry or worn pins, and sometimes grit in the knuckles. In Flomaton the doors that squeal first are usually exterior doors, because moisture strips the lubricant and starts surface corrosion inside the knuckle.

Will fixing the hinges fix my latching problem?

Frequently. A door that has dropped on its hinges puts the latch below the strike. Bringing the door back to position often means the lock works again with no other work.

Broken, stuck, or will not lock?Talk to someone who works on these every day.

Click to Call (205) 619-2895

Other door repair services in Flomaton


Door Hinge Repair near Flomaton

We cover the surrounding Escambia County and the Alabama Gulf Coast communities as well:

All door repair services in Flomaton  ·  Door Hinge Repair across Alabama  ·  All Alabama service areas

One call gets you an answer.We will tell you what is wrong and what it takes to fix.

Click to Call (205) 619-2895
Click to Call (205) 619-2895Tap to speak to a door repair tech now